FREE USPS PRIORITY SHIPPING!
The mst vintage is a small, analogue speedometer with a brass bezel in an appealing 'old school' look.
The design is different, but technically it is identical to the motoscope tiny. The dial is based on the streamline design of the 40's and 50's. Additionally, it features a yellowed and cracky surface giving the dial its extremely aged look.
The bezel and indicator are made from solid brass and have been manually coated with patina. The created patterns and signs of aging vary with each instrument and give it an individual and unique look.
The mst Vintage is a very compact, analogue 49 mm speedometer. Speed is digitally measured and precisely displayed via stepping motor and indicator.
The installation diameter of 49 mm and the installation depth of only 24 mm provide various installation options.
The high quality aluminium casing is turned from solid metal and its surface is anodized black. The casing is 100% water-tight and resistant to vibrations.
The analogue dial is indirectly illuminated by white LEDs. The innovative LED display is hidden behind the black part of the dial and only visible through the dial while operating, not when switched off. The LED luminosity is automatically adjusted to achieve optimal readability in dark, sunlight and dawn conditions.
If the speed exceeds the 200 km/h on the analogue scale, it is automatically displayed in the LED display. The maximum speed is recorded as well. The 4 indicator lights (blue, red and 2 x green) are also integrated into the dial. These lights are only visible when operated, too.
You can toggle between the different informations on the LED display by operating the supplied menu push-button or e.g. the headlight flasher push-button on the handle bar.
Default value on the display is the time. If needed, a short actuation of the push-button will display the values of total distance, day trip, on-board voltage etc.
All functions are easy to operate with the push-button, e.g. day trip, reset or the like. Default settings or recorded values are of course stored even with the power supply switched off.
The motoscope tiny is easy to install with the two M3 threaded holes on the back side. There are various motogadget brackets available for installation. Refer to 'Brackets'.
Connection and Sensors
The detailed installation and operating instructions (refer to 'Downloads') help with the connection of instrument even for users without any previous experience in handling the vehicle's electrical system.
The supplied speedometer sensor in stainless steel is very small (M5/23 mm) and therefore easy to hide. The sensor can be easily installed on front or rear wheel with the connector cable (1.5 m long). This allows for the easy conversion of an originally mechanical speedometer drive on a motorbike.
The motoscope tiny is compatible with various original speedometer sensors (dry reed contact and proximity sensors) of the motorbike manufacturers. In this case, the terminals have to be connected only and the mechanical sensor installation will be completely obsolete.
An intelligent 'Teach Function' allows for the easy calibration of the speedometer - even on vehicles with transmission sensors, e.g. Harley Davidson.
Specifications and Features
Mounting diameter: 49 mm
Weight: approx. 110 g
Mounting: 2 x M3 threaded hole
Power consumption, operating: approx. 200 mA (load dependent)
Operating voltage: 9 V - 15 V
Operating temperature: -20°... +80°C
Speedometer, analogue (needle): 0 – 200 km/h or mi/h
Speedometer, numeric (LED display): 200 – 999 km/h or mi/h
Max. speed: 0 – 999 km/h or mi/h
On-board voltage: 9 – 15 V
Clock: 00:00 – 23:59
Trip meter: 0 – 999.9 km or mi
Total distance (adjustable): 99999 km or mi max.
Indicator lights: turn signal, high beam, neutral, hazard light
FREE USPS PRIORITY SHIPPING! These have become an essential element to our full custom wiring harnesses. Makes for a tidy, efficient and reliable electrical system. I don't know how we ever wired up without them!! The new mo.unit blue has moved on from the established...
FREE USPS PRIORITY SHIPPING! The mo.unit Cable Kit is a ready made set of cables to aid in the assembly of a wiring harness. This cable kit consists of top grade copper-strand cables and will help you doing quick work of creating a new wiring...
FREE USPS PRIORITY SHIPPING WHEN PURCHASED TOGETHER WITH ANY OTHER MOTOGADGET PRODUCT! Use this in combination with the mo.unit blue, or m.unit V2 to reduce cable clutter and simplify your wiring harness. Installed into the handlebar tube (or other suitable location) this tiny cylinder connects to...