Motogadget Chronoclassic, Black Bezel, Green LCD

FREE USPS PRIORITY SHIPPING!

A high-quality round instrument in a timeless, classic design. The installation dimension of 80 mm is common for many vehicles. 

Housing

The high-quality aluminum housing is turned and milled from solid material on CNC machines. The surface is brushed and anodized in black or natural aluminium. The housing has a vent valve with Gore membrane, which prevents fogging. The viewing window of the instrument is made of a scratch-resistant special plastic. Due to its common size of 80 mm, original instruments can often be replaced very easily.

Analog Display With Needle And LCD

Optimum readability via a white pointer on a black dial. The innovative, full-surface backlighting allows for the maximum surface area to be used for the dial.

When the instrument is switched off, no symbols are visible. Freely adjustable transmission ratios and the pointer damping enable precise and jitter-free speed indication via the stepper motor. The LCD is very easy to read and illuminated, even in direct sunlight.

Four ultra-bright warning light LEDs complete the instrument. The red LED acts as a warning light when the set speed limits are reached, temperatures (min./max.), pressure measurement (min./max.), on-board voltage and for the oil pressure switch or similar existing sensors. Different warning functions are indicated by different flashing sequences or constant illumination.

Compatibility

Thanks to the standard installation diameter, the instrument is easy to fit to many vehicles. Various optional mounting accessories are available separately.

Connection And Sensors

The connection cable has a length of approx. 55 cm and the connectors are pre-installed. For the vehicle side, the corresponding counterparts are supplied. The input for the speed measurement is simply connected to the ignition coil or ignition box. The included speedometer sensor made of stainless steel is small (M5/22 mm) and can be easily attached to the front or rear wheel with the 1.5 m connection cable. Sensors for the optional measurement of air, oil or water temperature and oil pressure are available separately.

Operation

A menu button or, for example, the light horn button on the handlebars switch between the LCD displays. The first line permanently displays the speed. If required, further measured values can be the display by pressing a button. Settings or saved values are retained and saved even without a power supply.

Specifications

• Mounting diameter: 80 mm
• Overall diameter (screw ring): 85 mm
• Housing depth without cable gland: 34 mm
• Weight: approx. 230 g
• Mounting: 3 x M4 threaded bush
• Current consumption in operation: 200 mA
• Current consumption in idle state: 0 mA
• Operating voltage: 9 V - 18 V
• Operating temperature: -20°C to +80°C
• Tachometer (analog/pointer): 0 - 8, 10, 14 krpm
• Speedometer (LCD): 0 - 350 km/h or mph
• Trip meter up to 999 km or mi
• Total kilometers (adjustable) up to 250,000 km or mi
• Travel time display: 0 - 99:99:99 h/min/s
• Tachometer (on LCD): 0 - 20,000 rpm
• adjustable speed warning (int. LED and ext. switching flash): 0 - 20,000 rpm
• On-board voltage display: 9 V - 18 V
• NEW! Undervoltage warning LED flashes when on-board voltage drops below approx. 11V, replaces charge control lamp
• Air temp* (optional instead of water temp.): -20 - 80 °C / -4 - 17°F with High-/Low-warning
• Water temperature* (optional instead of air temp.): 40 - 120 °C / 104 - 24°F with high/low warning
• Oil temperature*: 40 - 160 °C / 104 - 320 °F with High/Low warning
• Oil pressure*: 0.5 - 8 bar / 8 - 116 psi with high/low warning
• Time measurement: 0 - 100 km/h o. 0 - 60 mph 0.0 - 99.9 sec.
• instantaneous acceleration: (-20.0) - 20.0 m/s2
• Average speed: 0 - 350 km/h o. mph
• Maximum speed: 0 - 350 km/h o. mph
• Maximum speed: 0 - 20,000 rpm
• max. positive acceleration: 0 - 20.0 m/s2
• max. negative acceleration: 0 - (- 20.0) m/s2
• Gear indicator: N, gear 1 - 6
• green control LED: idle (N)
• yellow control LED: turn signal left, right
• blue control LED: high beam
• Red control LED: for various external warning functions (e.g. oil pressure switch
  oil pressure switch), internal (speed, temperature, pressure, voltage)
• Output for ext. switching flash lamp, switching capacity max. 1.4 A

Package Contents

• Instrument with 55 cm connection cable & connector
• Cable fuse
• Speedometer sensor with 150 cm connection cable & two magnets
• Mini pushbutton
• Stainless steel mounting screws
• QR code for mounting and operating instructions