$6.95 USD - Sold Out
Replacement switch for our low-profile switch blocks. Convert our switch block to dual-pushbutton! Great for controlling horn and start from the same side of the handlebars. The pushbutton is a momentary-on type. Pre-soldered with wires.
$39.95 USD $21.95 USD
Universal solid state rectifier and regulator. Replaces both your regulator and rectifier, or diode and rectifier. Not suitable for electro-magnet alternators. For permanant magnet alternators only. Negative earth electrical systems only. Not compatible with positive earth systems. For single or 3-phase alternators (simply ignore one...
$44.95 USD $33.95 USD
Solid state rectifier and regulator with built in capacitor.Just like the Podtronics units, but without the branding!Can be used with battery as a standard regulator/rectifier or without a battery (only if your bike's charging system produces enough power at idle speeds).IMPORTANT NOTE: If using without...
$39.95 USD $26.95 USD
Polished stainless steel bezel, body and bracket. White face. Perfect for your cafe racer, bobber, chopper, street tracker, or Brattstyle project. Some images here show KPH model. We will ship you the MPH model. Extra small speedo. Great for alternative fitment locations such as aside...
$39.95 USD $35.95 USD - Sold Out
MPH speedo (images show the KPH version but rest assured you will be sent the MPH version!). Stainless steel bezel, body and bracket with satin-black finish. Black face. Extra small speedo. Great for alternative fitment locations such as aside the tank or off the lower...
$64.95 USD $47.95 USD
Some images here show KPH model. We will ship you the MPH model. Looks exactly the same except it states MPH instead of km/h.Speedo with built-in warning lights & LED backlight, 60mm diameter, polished stainless steel, white face. Features: - 0-140mph, - trip meter and...
$39.95 USD $27.95 USD
Images here show KPH model, but you get the idea, right! We will ship you the MPH version. Polished stainless steel bezel, body and bracket. Black face. Perfect for your cafe racer, bobber, chopper, street tracker, or Brattstyle project. Extra small speedo. Great for alternative...
$49.95 USD $34.95 USD - Sold Out
Speedo with trip meter, 60mm diameter (2.36"), black satin painted stainless steel body and bezel, black face. Features: - 0-160mph, - trip meter and odometer, - incandescent bulb backlight, - black mounting bracket, - bezel diameter 67mm (2.64"), - body diameter 60mm (2.36"), - length...
$59.95 USD $45.95 USD
Images here show KPH model. We will ship you the MPH model. Speedo with built-in warning lights & LED backlight, 60mm diameter, polished stainless steel bezel & body with a black face. Perfect for your cafe racer, bobber, chopper, street tracker, or Brattstyle project. Features:...
$64.95 USD $55.95 USD
This listing is for the 140MPH model. Some of the images here show the km/h model, but we will definitely send you the MPH model. Speedo with built-in warning lights & LED backlight, 60mm (2.36") diameter, black satin bezel & body with a black face. Features: -...
$44.95 USD $25.95 USD
Mini handlebar switch block in polished aluminium with push-button switch. Made in Japan by POSH. This listing is for 1 switch block (as shown in images) only. Beautiful craftsmanship as one would expect from POSH. Machined from billet aluminium. Great for that uncluttered look. Switch...
$54.95 USD $29.95 USD
Mini Handlebar Switch Block in Alloy. Made in Japan by POSH. This listing is for 1 switch block (as shown in images) only. Beautiful craftsmanship as one would expect from POSH. Machined from billet aluminium. Great for that uncluttered look. Switch block body measures 41mm...
$44.95 USD $24.95 USD
Mini handlebar switch block in polished aluminium with ON-OFF-ON toggle switch. Made in Japan by POSH. This listing is for 1 switch block (as shown in images) only. Beautiful craftsmanship as one would expect from POSH. Machined from billet aluminium. Great for that uncluttered look....
$44.95 USD $24.95 USD
Mini handlebar switch block in black with push-button switch. Made in Japan by POSH. This listing is for 1 switch block (as shown in images) only. Beautiful craftsmanship as one would expect from POSH. Machined from billet aluminium. Great for that uncluttered look. Switch block...
$54.95 USD $28.95 USD
Mini handlebar switch block in black with black, plastic-coated toggle switch. Made in Japan by POSH. This listing is for 1 switch block (as shown in images) only. Beautiful craftsmanship as one would expect from POSH. Machined from billet aluminium. Great for that uncluttered look....
$44.95 USD $25.95 USD
Mini handlebar switch block in black with ON-OFF-ON toggle switch. Made in Japan by POSH. This listing is for 1 switch block (as shown in images) only. Beautiful craftsmanship as one would expect from POSH. Machined from billet aluminium. Great for that uncluttered look. Switch...
$12.95 USD $9.45 USD - Sold Out
Clamp-on handlebar switch block with toggle and 2 push-buttons. 3-position toggle switch: ideal for indicators or headlights. Push buttons can be used for horn or start for example. Designed to fit the contour of 7/8" bars, but will fit 1" bars. Main body dimensions: 36mm x 29mm...
$24.95 USD $13.95 USD
Mini switch block in black with a low-profile, curved fascia. Suit 7/8" handlebars. Designed by us here at MMCC, we've had the wires soldered on for you as we know how easy it is to destroy the switches by putting slightly too much heat in...
$24.95 USD $16.95 USD
Mini switch block, chrome plated, low-profile, curved fascia. Suit 7/8" handlebars. Designed by us here at MMCC, we've had the wires soldered on for you as we know how easy it is to destroy the switches by putting slightly too much heat in during soldering....
$34.95 USD $22.95 USD - Sold Out
NO LONGER STOCKED AT US SHOP. YOU CAN ORDER THESE FROM OUR AUSTRALIAN SHOP ONLY: https://www.shop.modernmotorcyclecompany.com.au/collections/instruments/products/tacho-48mm-black-face Polished stainless steel bezel, body and bracket. Black face. Extra small tacho. Matches our 48mm speedo. Features: - 0-12,000RPM, - incandescent bulb backlight, - includes stainless steel mounting...
$34.95 USD $22.95 USD - Sold Out
NO LONGER STOCKED AT US SHOP. YOU CAN ORDER THESE FROM OUR AUSTRALIAN SHOP ONLY: https://www.shop.modernmotorcyclecompany.com.au/collections/instruments/products/tacho-48mm-white-face Polished stainless steel bezel, body and bracket. White face. Extra small tacho. Matches our 48mm speedo. Features: - 0-12,000RPM, - incandescent bulb backlight, - includes stainless steel mounting...
$48.95 USD $34.95 USD - Sold Out
Tachometer, 60mm diameter, polished stainless steel, black face with LED backlight. Note: this tacho does not match the bulb backlit speedo's in terms of aesthetics when illuminated. We strongly recommend combining LED back-lit speedo's with LED back-lit tacho's, and bulb-lit speedo's with bulb-lit tacho's. Features:...
$74.95 USD
PRE-ORDER ONLY. SHIPS IN 2 TO 4 WEEKS. FROM POSH, JAPAN. Tachometer, 60mm diameter, polished stainless steel, white face with incandescent bulb backlight. Note: this tacho does not match the LED backlit speedo's in terms of aesthetics when illuminated. We strongly recommend combining LED back-lit...
$48.95 USD $29.95 USD - Sold Out
Tachometer, 60mm diameter, polished stainless steel, white face with LED backlight. Features: - 0-12,000RPM, - white LED backlight, - stainless steel mounting bracket, - bezel diameter 67mm, - body diameter 60.5mm, - length 53mm (not including the tacho cable spigot), Cable spigot size is M12...
$15.95 USD
Stainless steel base with plastic lens. Width: 4.33" (110mm), Height: 2" (51mm), Depth: 1.93" (49mm), Depth with bulb base: 2.83" (72mm), M5 mounting bolts, 0.71" (18mm) long. Includes bulb. Light has 2 wires: tail light, brake light. Earth is through tail light body (ring terminal...
$24.95 USD
Ships from Australia Stainless steel base with plastic lens. Width: 4.33" (110mm), Height: 2" (51mm), Depth: 1.93" (49mm), Depth with bulb base: 2.83" (72mm), M5 mounting bolts, 0.71" (18mm) long. Includes bulb. Light has 2 wires: tail light, brake light. Earth is through tail light...
$41.95 USD - Sold Out
Chrome-plated die-cast aluminium body. This stop/tail light has a number plate bracket incorporated. A clear window in the bottom of the lamp assembly allows white light to illuminate the number plate. Lens does not have an "E" mark. Includes protective mounting rubber, mounting bolts and stop/tail...
$44.95 USD $36.95 USD - Sold Out
Our favourite tail light! This tail light has a number plate bracket incorporated. A clear window in the bottom of the lamp assembly allows white light to illuminate the number plate. Lens does not have an "E" mark. Bezel diameter: 45mm, Body diameter: 36mm, Lamp...
$24.95 USD $14.95 USD
Mounting flange diameter: 64mm (2.52"), Lamp diameter: 30mm (1.18"), Overall length: 72mm (2.83"). Mounts to bracket/fascia with 45mm (1.77") diameter hole. Satin-black steel shell, chrome-plated steel bezel. Light has 2 wires: tail light, brake light. Earth is through tail light body (ring terminal can be...
$38.95 USD $30.95 USD
Lens diameter: 56mm (2.20"),Lens protrusion length: 14mm (0.55"),Body diameter: 63.5mm (2.50"),Main body length: 23.5mm (0.93"),Rear body diameter: 26mm (1.02"),Rear body length: 32mm (1.26"),Light has 3 wires: tail light, brake light, and earth.Note: yellow wire is earth and black wire is tail light.There is a small...
$39.95 USD
EMGO round, classic tail light in chrome. Lens diameter: 56mm (2.20"),Lens protrusion length: 14mm (0.55"),Body diameter: 63.5mm (2.50"),Main body length: 23.5mm (0.93"),Rear body diameter: 26mm (1.02"),Rear body length: 32mm (1.26"),Light has 3 wires: tail light, brake light, and earth.Note: yellow wire is earth and black...
$21.95 USD $18.95 USD
Doherty-replica, dual-cable, pull throttle/twistgrip for 7/8" bars. Smooth-action and a great classic look. Cast aluminium body with black finish, aluminium sleeve with throttle tension adjuster and wide-open throttle stop adjuster. Overall length: 152mm (6"). Length of exposed throttle sleeve: 117mm (4.6"). Width of chrome clamping...
$21.95 USD $18.95 USD
Doherty-replica, dual-cable, pull throttle/twistgrip for 7/8" bars. Smooth-action and a great classic look. Chrome plated aluminium body with aluminium sleeve with throttle tension adjuster and wide-open throttle stop adjuster. Overall length: 152mm (6"). Length of exposed throttle sleeve: 117mm (4.6"). Width of chrome clamping body:...
$21.95 USD $18.95 USD - Sold Out
Doherty-replica, single-pull throttle/twistgrip for 1" bars. Smooth-action and a great classic look. Satin-black finish over aluminium body with aluminium sleeve with cable and throttle tension adjuster. Overall length: 140mm (5.5"),Length of exposed throttle sleeve: 115mm (4.53"),Width of chrome clamping body: 25mm (1"),Diameter of chrome clamping...
$19.95 USD
Doherty-replica, single-pull throttle/twistgrip for 7/8" bars. Smooth-action and a great classic look. Satin-black finish over aluminium body with aluminium sleeve with cable and throttle tension adjuster. Overall length: 140mm (5.5"),Length of exposed throttle sleeve: 115mm (4.53"),Width of chrome clamping body: 25mm (1"),Diameter of chrome clamping...
$21.95 USD
Doherty-replica, single-pull throttle/twistgrip for 1" bars. Smooth-action and a great classic look. Chrome plated aluminium body with aluminium sleeve with cable and throttle tension adjuster. Overall length: 140mm (5.5"), Length of exposed throttle sleeve: 115mm (4.53"), Width of chrome clamping body: 25mm (1"), Diameter of...
$21.95 USD
Doherty-replica, single-pull throttle/twistgrip for 7/8" bars. Smooth-action and a great classic look. Chrome plated aluminium body with aluminium sleeve with cable and throttle tension adjuster. Overall length: 140mm (5.5"), Length of exposed throttle sleeve: 115mm (4.53"), Width of chrome clamping body: 25mm (1"), Diameter of...
$9.95 USD $6.95 USD - Sold Out
Replacement switch for our low-profile switch blocks. Convert our switch block to dual-toggle! Great for controlling indicators and headlights from the same side of the handlebars. The toggle is an "on/centre-off/on" type. Pre-soldered with wires.
$11.95 USD $8.95 USD - Sold Out
Designed to clamp on to your fork tubes just below or above your bottom steering yoke. This listing is for 1 pair of brackets. Suits fork tubes 30-39mm in diameter. 10mm mounting hole for indicators. Comes with mounting nuts and bolts. Can be used for...
$94.95 USD $59.95 USD - Sold Out
This listing is for 4 turn signals and mounting hardware. Cast aluminum with black powder-coating. 23 watt bulbs included. Body dimensions: 1.46" (37mm) diameter, 2.36" (60mm) long Stem length: 0.59" (15mm) Includes mounting bolts, nuts, spring & flat washers, and wiring connection adapters to convert standard bullet connector...
$94.95 USD $66.95 USD - Sold Out
This listing is for 4 turn signals and mounting hardware. Cast aluminum with chrome plating. 23 watt bulbs included. Body dimensions: 1.46" (37mm) diameter, 2.36" (60mm) long Stem length: 0.59" (15mm) Includes mounting bolts, nuts, spring & flat washers, and wiring connection adapters to convert standard...